What RSHQ’s psychosocial audit means for Queensland mines and quarries

Oct 27, 2026 | Mental Health Tips

If you run or support a mine, quarry or gas operation in Queensland, the regulator has just told you where it thinks the gaps are.

In 2026, Resources Safety and Health Queensland (RSHQ) finished a campaign looking at how psychosocial hazards are being managed across the resources industry. It audited 61 operations: 19 coal mines, 19 mineral mines, 18 quarries and 5 petroleum and gas operations. The summary report is public, and it is worth a read for anyone in HSE, site leadership or People and Culture.

Here is what it found, what it means in plain terms, and what you can do about it this quarter.

The short version

Most sites are trying. Very few have it fully sorted.

RSHQ found that 31 of the 61 operations (51 per cent) had completed a documented psychosocial hazard risk assessment. The rest had either not started a formal assessment or were relying on things like standalone policies and wellbeing programs instead of a structured risk process.

When RSHQ looked at overall capability, 39 of the 61 operations were rated as being in the early stages of building an effective system for managing psychosocial risk.

And here is the part that stood out to me. Wellbeing programs were common. 87 per cent of operations offered an Employee Assistance Program and 85 per cent had proactive mental health or wellbeing initiatives. Only one operation received a recommendation about its EAP or wellbeing programs.

So the support side is mostly in place. The gap is in the risk management side: finding what is causing harm in the way work is designed and organised, and fixing it.

Wellbeing programs are not a risk assessment

This is a common mix-up, in mining and well beyond it.

An EAP, a resilience session or a wellbeing week can help people cope. They are worth having. But they do not tell you whether rosters, workloads, isolation, poor change management or bullying on a particular crew are creating risk, and they do not control those things.

RSHQ is clear that psychosocial hazards need the same risk management approach as any other safety and health risk on site:

  1. Identify how, when and where psychosocial hazards may occur.
  2. Analyse and assess the likelihood and impact of exposure.
  3. Develop and implement controls, and update the site’s Safety and Health Management System (SHMS) or Safety Management System (SMS).
  4. Monitor and review whether those controls are working.

Consultation with workers runs through all four steps.

Where the gaps were

Consultation stopped too early

Where risk assessments had been done, worker consultation was evident in 24 of 31 (77 per cent). But consultation dropped off when it came to designing the controls. Workers were asked what the problems were, and less often asked how to fix them. Only 54 per cent of those assessments allowed anonymous participation.

About two in five operations also did not use workplace data they already had, such as incident reports, worker surveys and complaints, to inform the assessment.

Psychosocial risk sat outside the safety system

One third of operations with a completed assessment had not built the identified risks and controls into their SHMS or SMS. If it lives in a separate HR folder, it is less likely to be monitored, reviewed or treated like the safety risk it is.

Reporting and investigations

Two thirds of operations (67 per cent) had a documented process for reporting psychosocial hazards and incidents. Of those, 17 per cent offered no anonymous option.

Investigations were the weakest area. Around half of operations had no documented process for investigating reported psychosocial hazards and incidents. Among those that did, 81 per cent did not include trauma-aware principles, 59 per cent had no arrangement to keep people updated during an investigation, and 44 per cent had no defined timeframes. 92 per cent of operations received a recommendation in this area.

Training for workers and supervisors

57 per cent of operations did not train workers to identify and report psychosocial hazards. 49 per cent did not train supervisors to identify, manage, respond to and report them. Supervisors are usually the first person a worker tells, so this one matters.

Accommodation

Of the 21 audited operations with accommodation on, adjoining or adjacent to a mining lease, only 8 had assessed psychosocial risks at that accommodation. Hazards identified included remote or isolated work, violence and aggression, bullying and harassment, including sexual harassment.

Quarries and smaller operators

Quarries had the highest share of operations yet to complete a documented assessment. RSHQ notes many were smaller businesses where staff wear several hats and have limited resources. If that sounds like your site, you are not alone, and the obligation still applies.

Six practical steps for this quarter

You do not need a massive program to close the biggest gaps. Start here.

  1. Do a documented psychosocial risk assessment, or check the one you have. Use RSHQ’s four steps. If you already have one, check it covers every work group, shift pattern and the accommodation.
  2. Bring workers into the fixes, not just the problems. Run a short session where crews help design controls. Offer an anonymous way to contribute.
  3. Use the data you already hold. Unplanned leave, hazard reports, complaints and exit feedback are all clues.
  4. Put it in the SHMS or SMS. Psychosocial risks and controls should sit alongside your other principal hazards, with owners and review dates.
  5. Fix your investigation process. Write down timeframes, how parties will be kept updated, how outcomes feed back into risk management, and what trauma-aware practice looks like on your site.
  6. Train supervisors first. Give them the skills to spot hazards, respond well to a disclosure and know what to report and where.

One more thing on reporting. Under Queensland’s resources legislation, operators must notify RSHQ of psychosocial incidents that meet the definition of a High Potential Incident or Serious Accident. RSHQ asks that psychosocial incidents go directly to its Psychosocial Team, not through the RSHQ Portal. Check the RSHQ reporting page for current contact details and thresholds.

Where this fits with the Queensland Code of Practice

Mines, quarries and petroleum and gas operations are regulated by RSHQ under the resources safety and health Acts. Workplaces under the Work Health and Safety Act 2011, including many contractors, suppliers and off-lease accommodation providers, sit with Workplace Health and Safety Queensland and the Managing the risk of psychosocial hazards at work Code of Practice 2022. The method is very similar either way: identify, assess, control, review, and consult throughout. Our guide to the Queensland psychosocial Code of Practice walks through it.

How Mental Mate can help

Mental Mate works with Queensland employers to make psychosocial risk management practical. That might be psychosocial risk assessment advisory, where your team runs the assessment with our guidance and review, training for leaders and supervisors, or ongoing psychosocial advisory.

If the RSHQ findings have you wondering where your site stands, book a 20-minute chat. No pressure, just a clear conversation about where to start.

This article is general information, not legal advice. Check the current legislation and RSHQ guidance for your operation, and get advice specific to your situation.

If this article has raised anything for you, support is available. Call Lifeline on 13 11 14, any time of day or night. In an emergency, call 000.

Sources

Copyright © 2025Mental Mate. All Rights Reserved. | Terms and Conditions | Privacy Policy